1000 hp Trailer Mounted Drilling Rig

 

 

Drawworks – OEM-1000

 
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4)
brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi.
Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. 

Manufacturer = Kobelt

ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating

54,500 ft-lbs @ 100 psi, maximum 760 rpm, 1664 sq in lining area.

Manufacturer = Witchita.

iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive Chain - Four-strand, 1 ½” pitch
vii. Total Disc Brake Area - 1680 sq. inches

Jack Up Barge 225 ft for Sale

  

Classification Notation
ABS, *A1, Self-Elevating Units, * PAS

Main Dimension
Length overall Loa : 66.90m
Length moulded : 43.80
Breadth moulded B : 39.00m
Depth moulded D : 5.20m
Design draft T : 3.20m

Main deck area : ≥ 500sqm
Maximum variable load : 800t
Dec load : 5t/sqm
Speed : ≥ 4.0kn

Ideco H3000 Mechanical Drilling Rig for Sale

 

 

 

 

 Description

Drawworks
Ideco H-3000 hp mechanically driven, with main drum grooved for 1 5/8” Drilling Line.
Drawworks is provided with Make-up/Spinning Cathead, Foster Type 37S-AK,
Breakout Catheads, Foster Type 24B-AK and Crown-O-Matic with emergency
activator switch on Driller’s Console.

Auxiliary Brake
Baylor Auxiliary Eddy Current Brake, Model 7838 c/w 100 bbls Brake Cooling water tank.
The Drawworks c/w Auxiliary Brake is installed on the extended sling shot base skid.

Mast
Lee C. Moore, Cantilever Type, 30,000 ft Drilling Depth Capacity (5” Dp), 156 ft height,
30 ft x 30 ft Drill floor, Static Hook Load 1,555,000 lb, Casing Capacity 1,500,000 lb,
Max. Lines 14, Set-back Load Cap. 30,840 ft 5” Dp (800,000 lb).

Mast is provided with the following :
1. Monkey Board.
2. Casing Stabbing Board (adjustable from 20-50 ft)
3. Belly Board.

Land Drilling Rig - JC 40 DB draw-works

Draw-works
JC 40 DB draw-works with 238DBBS Eaton air-cooled
disc brake powered by (1) 1000 (kw) AC traction motor

Substructure & Mast
JJ225/42-KS1 138’ mast, 500,000 hook load .
1 1/8” Line; hydraulic raising
Substructure=DZ225/6.
7-S1; height 22’ H;
500,000 set back load; hydraulic raising 

Generators
3)1000GF4- 1000 KW;600 volt;60 Hz;
AC generators powered by (3) Chinese  3512  diesel engines)
(1) Volvo auxiliary gen set 400kw 480v 60 Hz only for pre start.

Mud pumps
(2) HHF-1300 hp; powered by (1 each) 1000 (Kw) AC traction motors;
max output 720GPM (7” liners)

Drilling Rig - Schramm T130 For Sale

Model : T130 Drill Rig

 Manufacturer : Schramm

 Year : 2014

 Condition : Used

Description

Schramm T130 drilling rig 

 1300 cfm / 350 – 500 psi air compressor 

 (Excellent condition, oil changed every 100 hours)

 Sub Structure – extra heavy with folding ramp

 Hammer oiler

 4000' ft of (30' x 4-1/2") drill pipe (tested)

 4 drill collars

 2 Numa hammers (one P120 & one N 100) with 14 inch bits – low hour 

 with 1 new bit still in the crate

Failing Holemaster 3000-CF Drill Rig for sale

 

 

 

 

 

 

 

Model : 3000-CF Drill Rig
Manufacturer : Failing
Condition : Used

 

Description

Failing Holemaster 3000-CF drill rig
Rated capacity: 3700 ft. depth w/3-1/2” drill pipe.
Mast: Cold drawn street tubing, elec. welded, 3-sect. w/3-way taper on top sect.
Hydraulically raised & lowered. Wired for elec. lights. Equipped w/retracting
channel swivel guides for reverse circulation swivel. Equipped w/ladder,
climber’s safety device

Cardwell D/D Well Service Drilling Rig

 

 

 

Model : D/D Well Service Rig
Manufacturer : Cardwell
Condition : Used

Description

 

Cardwell D/D well service Rig,
7/8" Tubing line, 9/16" sandline, 8-5/8" x 7" x approx 50'H Dbl pole mast,
5-Sheave crown block
Detroit 4-71 diesel engine
4-Spd manual transmission
Wet kit,
Hydraulic tank